Please wait a short moment whilst
we retrieve your vehicle...
To ensure that the timing belt is operating at optimum tension at all times, a belt tensioner is needed. This rotating pulley prevents the belt from becoming slack and operating inefficiently or incorrectly. The tensioner may have to be adjusted manually during fitting though many, known as automatic tensioners, have springs which automatically adjust the tension.
for any car are an integral part of timing belt operation and should be replaced if wear and tear is spotted to prevent damage to the belt.
The drive belt, or fan belt, provides power to ancillary systems within the car, such as the alternator, air conditioning and power steering.
are required to prevent it from becoming loose and moving irregularly. These idler pulleys are an essential part of the setup.
Each drive belt idler can become worn over time, becoming noisy and eventually producing a negative effect upon the drive belt. When replacing the drive belt it may also be necessary to replace the idler pulleys. Check online at Eurocarparts.com for a great range of
for any car.
The timing belt damper, or tensioner, works in conjunction with idler pulleys to maintain tension in the timing belt. Often fitted with a spring inside,
are an essential part of the belt system. The timing belt itself is responsible for ensuring that valves within the engine cylinders open and close at the right times. The timing belt tensioner prevents the belt from becoming loose and flapping freely.
for any car can become worn over time and need to be replaced in order to keep the belt running smoothly.
|Dimensions||Outer dia mm||Extra Information||for V-bibbed belt, with screw|
|Outer Diameter [mm]||70||Outer Thread [mm]||M 8 x 1,25|
|Required quantity||1||Spanner Size||10|
|Weight [kg]||0,280||Width [mm]||25|
|Fitted Quantity||1||Date To||10/2001|
|Dimensions||Outer dia mm||Number of Ribs||6|
|Outer Diameter [mm]||103||Width [mm]||27|
|Fitting Position||Alternator||Fitted Quantity||1|
|Other Information||AIR CON With A/C, Part Spec 6 Ribs|
|Extra Information||for timing belt Type of starter||Inner Diameter [mm]||26,6|
|Outer Diameter [mm]||60||Required quantity||1|
|Weight [kg]||0,470||Width [mm]||26,6, 37,1|