Home > Car Parts > Engine Parts > Engine Parts > Gaskets & Seals
are used to form a seal between important vehicle components. In older engines, these may be made of cork, while more modern
are made of thin metal or carbon.
A car gasket must be replaced if a leak is detected, or when removing or replacing components. The head gasket is a very important example, and is responsible for sealing the cylinder head of the engine. If you are planning to replace any gasket, there is a great choice of quality
readily available at Eurocarparts.com.
perform the same function as gaskets and are responsible for creating a seal between two mechanical parts within the engine. Often made of rubber, quality
are subjected to extreme conditions and high temperatures in and around the engine, and will perish and degrade over time and regular usage. If a gasket seal fails it must be immediately replaced to prevent damage or leakage occurring. They should also be replaced when replacing other corresponding parts. Euro Car Parts stocks a wide range of quality gaskets & gasket seals for any car at best prices.
| Dust Cover | With dust lip | Extra Information | Mounting dry and without any additional oil and grease Mounting dry and without any additional oil a |
|---|---|---|---|
| Inner Diameter [mm] | 32 | Matching Adapter | Elring 537.490 |
| Material | PTFE (Polytetrafluoroethylene)/ACM (Polyacrylic) | Outer Diameter [mm] | 47 |
| Radial Shaft Seal Design | ASW | Swirl Type | Right-hand Twist |
| Width [mm] | 10 | Fitted Quantity | 1 |
| Dust Cover | With dust lip | Extra Information | Mounting dry and without any additional oil and grease Mounting dry and without any additional oil a |
|---|---|---|---|
| Inner Diameter [mm] | 35 | Matching Adapter | Elring 537.510 |
| Material | PTFE (Polyetrafluoroethylene/Teflon) | Outer Diameter [mm] | 48 |
| Radial Shaft Seal Design | ASW | Swirl Type | Right-hand Twist |
| Width [mm] | 10 | Fitting Position | Timing End |
| Fitted Quantity | 1 |
| Fitted Quantity | 1 |
|---|
| Diameter [mm] | 83,5 | Only in connection with | ZKS |
|---|---|---|---|
| Thickness [mm] | 1,2 | Fitted Quantity | 1 |
| Supplementary Article/Supplementary Info | With valve stem seals | Engine Code | APK, AQY |
|---|---|---|---|
| Fitted Quantity | 1 |
| Gasket Design | Multilayer Steel (MLS) | Length 1 [mm] | 400 |
|---|---|---|---|
| Material | Elastomer | Width [mm] | 141 |
| Engine Code | AEG, APK, AQY | Fitted Quantity | 1 |
| Engine Code | AZJ, BER, BEV, BHP, CBPA | Fitted Quantity | 1 |
|---|
| also available as universal article - see article no. | 030.790 | Chemical Properties | Permanently elastic |
|---|---|---|---|
| Contents [ml] | 70 | Extra Information | Compared to other silicone sealants, this sealing compound i s much harder after it has been vulcani |
| Packing Type | Tube | Technical Information Number | VW D 176 404 A2 |
| Temperature Range [°C] | -50°C - +180°C | Fitted Quantity | 1 |
| Chemical Properties | hardening, Not solvent-bearing, Permanently elastic | Colour | Anthracite |
|---|---|---|---|
| Contents [ml] | 70 | Material | Silicone |
| Packing Type | Tube | Standard | Dichtmasse |
| Temperature Range [°C] | -50°C - +300°C | Engine Code | APK |
| Fitted Quantity | 1 |
| Engine Code | APK; AQY | Fitted Quantity | 1 |
|---|