Auto Finesse Avalanche Snow Foam 20Ltr

Citrus Infused Pre Wash

Citrus-Infused Formula

A little of our ultra-concentrated Avalanche solution goes a long way. Just an inch or two in your Foam Lance bottle - topped up with water - is enough to create a thick, lingering foam that will deeply cleanse your paintwork of surface grit, grime and bonded contamination.

Spray And Rinse Formula

This citrus-infused formula is packed with advanced surfactants designed to safely lift and encapsulate harmful particles and traffic films, suspending them in the foam and allowing them to be rinsed away without damaging sensitive surfaces. Simply apply over the whole vehicle, leave to linger and rinse away the contamination without ever making contact.

Break Down Grime Safely

Your Snow Foam Lance uses a special metal gauze to not only activate the cleaning agents but to whip Avalanche into a thick foam that lingers for longer than any other pre-cleaner. The longer this product works on the surface the deeper it cleans, breaking down the most stubborn bonded contamination. Avalanche also works its way into awkward shuts and panel gaps cleaning those, too.

Swirl-Free Wash

Using Avalanche Snow Foam forms a crucial part of the pre-wash stage. One of the most important steps in all of detailing, it’s here where we remove potentially harmful, sharp gritty contamination and other heavy particles. Remove these before your contact wash to eliminate the risk of inflicting scratches and swirls by dragging them across surfaces with your mitt.

PH balanced snow foam

Avalanche safely and effectively cleans every exterior surface, from paintwork and vinyl to glass, trim and wheels. This heavy-duty cleaner is also wax, sealant and coating-safe meaning it won’t ever strip, degrade or damage your protection layers.

Product Information:

Capable of removing traffic films and breaking down dirt and road grime, Avalanche Snow Foam encapsulates sharp particles safely trapping it in the foam, allowing these potentially damaging – and often stuck-on - contaminants to be rinsed away without inflicting swirl marks or other defects. This makes using snow foam an essential part of the pre-wash process, one of the most vital stages in detailing where the heaviest, gritty particulate grime is removed without making any contact with the vehicle. Avalanche also works its way into awkward panel gaps and shuts to effectively pre-clean the unseen areas, too.

Sharp particles and heavy contamination can easily cause abrasion and inflict defects when dragged around on paintwork or gloss plastics with your wash mitt. So, for the safest wash possible, these contaminants must be removed prior to your 2-bucket contact wash. This means that following an effective pre-wash routine is crucial both on regular maintenance washes, and to limit the amount of polishing and correction needed during more in-depth details.

Avalanche can be utilised as a first stage pre-wash product, or immediately after using a pre-cleaner like Citrus Power Bug & Grime Remover or Dynamite Traffic Film Remover on the heaviest soiling, in which case this product is safe to agitate into more awkward areas such as window rubbers, emblems and grilles with a soft Detailing Brush. Here the agitation isn’t to scrub away contaminants, it’s merely to ensure that the solution is worked into all areas, and that any spent product (snow foam already encapsulating particulates) is moved away allowing it to be replenished with fresh solution to work on any remaining contamination. Avalanche lingers to attack grime for the maximum possible dwell time and uses a specially-developed combination of cleaning agents and advanced surfactants to pull contamination off of surfaces on a molecular level. Thes